Evaporative Cooling Towers & Condensers

Hem Produkt Evaporative Cooling Towers & Condensers

Evaporative Cooling Towers & Condensers

By evaporating water, wet cooling towers and condensers provide simple and cost effective solutions to many cooling requirements with a very low power consumption compared to other available technologies. 

We are specialists within evaporative cooling towers and condensers and can supply units from approx 20 kW up to 30 MW and 5500 m3/h per cell. C.A. Mörck have supplied more than 50 MITA units since we started working with them in 2008, and even more before then with previous partners/manufacturers.

Are you about to replace an old, install a new cooling tower or complement an existing cooling capacity? We will be more than pleased to assist you in selecting the optimal solution for your specific application needs. Call us today!

Our modular type cooling towers and condensers are manufactured with walls in GRP and supporting structure in hot dip galvanized steel as standard. Thus providing our clients with a corrosion free product with very high quality, low weight, short installation time, long life time and with a minimal need for maintenance.

Do you want to know more?

Peter Sundbaum

+46 -36 36 126

Advantages for you as customer

  • Knowledgeable salesmen with advisory function in cooling towers & condensers
  • Energy efficient cooling with low power consumption – environmentally friendly alternative
  • Customized solutions for the best total economy / ecological installation
  • Eurovent-certified parts and complete cooling tower models
  • Corrosion-free materials provides long lifespan
  • Minimal maintenance needs, i.a. due to directly connected axial fans / motors with permanently lubricated bearings on all the most common models
  • Small space consumption, low total weight
  • Short delivery times on cooling towers, with high delivery reliability
  • Accustomed to winter operation issues

Typical options

In connection to the pre-engineering phase we can offer several handy options to optimise operation, energy consumption and maintenance:

  • Service hatches,or fully removable side walls for simple and effective maintenance actions
  • Noise abating solutions, such as low speed fans, noise hoods and splash absorbing pads
  • Variable frequency drive for low energy consumption
  • Supporting frames in hot dip galvanized steel or stainless steel
  • Motor anticondensation heaters
  • Heating coils in water basin
  • Over flow and/or low level switches
  • Diffusor heaters to avoid ice formation on air outlet
  • and much, much more…

What is the difference between dry air coolers and evaporative cooling towers?

Watch this interesting film from Assoclima which consists of several different actors in the field of evaporative cooling and condensation.

Open Evaporative Cooling Towers

The most effective cooling can be achieved in those cases where cooling media is allowed to come in contact with ambient air. We have a wide variety of models from small to large units in plastic up to both site built cooling towers in both plastic and concrete.

All models are designed and adopted to allow optimal transport solutions with low CO2-imprint and simple installation on site at our customer locations.

Closed loop evaporative cooling towers and condensers

In such cases where the cooling media cannot be subjected to ambient air, one can still use the evaporative cooling effect by spraying water in recirculation over the cooling bundle. This is often used for example when condensating chiller media, such as ammonia, for various types of chillers.

Within this area, we also have special solutions such as hybrid cooling towers that work as “wet” (evaporative) coolers during the warmer period, and as a normal “dry” air cooler during the colder portion of the season. As well as adiabatic cooling towers that through evaporative effect pre-cools the cooling air flow which subsequently cools the cooling bundle.

Back to Top