Menu
HemPage 5
Tube Heat Exchangers

Tube heat exchanger Argon cooling

During the spring we have delivered a tube heat exchanger for gas cooling to an industrial client in the city of Luleå. It has now been installed and pressure tested and will be taken into operation shortly. The media on the tube side is Argon and 40% glycol/water mix on the shell side. The heat exchanger is in 1 pass configuration with a cooling effect of 45 kW. The unit is 2,4 meter long and 0,3 m in diameter with a heat transfer area of 25 m². With its titanium stabalized stainless steel material it ways in at 490 kg. If you
April 16, 2019
Plate Heat Exchangers

Hybrid heat exchanger started up

In the beginning of 2018 our client took their SPX APV Hybrid S4 Plate Heat exchanger into operation. The delivery was done as early as summer of 2017 to a power plant on the Swedish east coast. The application is for ehating of bio-oil (220 kW, 76 tons/hr) which is to be pumped through approx. 200 m pipes from the storage tank to the incineration boiler. APV’s fully welded plate heat exchanger which they call their ”Hybrid” model in effect looks like a tube heat exchanger on one side with up to 7 mm ”diameter” and with a more traditional corrugated shape/design
April 16, 2019
Cooling Towers

Four large cooling towers delivered

Close to two years after first site visit and meeting with this client, we have recently delivered four large PME 7204 Super Silent Cooling Towers to a pulp & paper mill in the middle of Sweden. The customer has prepared a completely new building for positioning of the cooling towers on top of it, with a common cooling water tank inside on the level below. In the same building, the heat exchange towards the process itself is contained. Due to the nature of the process cooling water, client has decided to use and heat exchanger in between to avoid the risk
April 16, 2019
Silencers

Contract for seven silencers, paper industry

We are pleased to have secured a new contract for BBM’s very popular silencers to a customer within the paper industry in the south west of Sweden. Exempelbild från annan leverans The project includes seven different positions for ventilation, aeration and blow off where the authoroties’ demands have increased when the plant has grown and habitation comes closer. The customer have purchased silencers from us before, and we are very pleased for this repeat trust. The units will handle flows ranging from 2 to 30 tons/hr, inlet diameters from DN 150 to DN 400 and the largest unit has a casing diameter of 1,2
January 15, 2018
Back to Top
Close
What are you looking for?

Contact us

    personal data policy » *

    Contact us

    031-36 36 120 info@campreq.se